lucalizaranzu/Shmingo-HAL
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Finished basic UART feature

Browse Source
This commit is contained in:
Luca Lizaranzu
2025-09-07 22:20:37 -07:00
parent b2c41e2cb4
commit 368eac7616
2 changed files with 15 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
SHAL/Include/Peripheral/UART/Reg/SHAL_UART_REG_F072xB.h
View File

@@ -112,6 +112,7 @@ constexpr uint32_t getAFMask(const AF_Mask mask){
case AF_Mask::AF6: return 0x06;
case AF_Mask::AF7: return 0x07;
}
__builtin_unreachable();
}
#endif //SHMINGO_HAL_SHAL_UART_REG_F072XB_H

20
SHAL/Src/Peripheral/UART/SHAL_UART.cpp
View File

@@ -17,16 +17,24 @@ UART::UART(const UART_Pair pair) : m_UARTPair(pair){
GPIO_Key Tx_Key = uart_pair.TxKey; //Tx pin
GPIO_Key Rx_Key = uart_pair.RxKey; //Rx pin
uint8_t Tx_Pin = getGPIORegister(Tx_Key).global_offset;
uint8_t Rx_Pin = getGPIORegister(Rx_Key).global_offset;
initGPIO(Tx_Key,PinMode::ALTERNATE_FUNCTION_MODE); //Initialize Tx GPIO with alternate function (initializes GPIO port as well)
initGPIO(Rx_Key,PinMode::ALTERNATE_FUNCTION_MODE); //Initialize Rx GPIO with alternate function
//Determine which AFR register (high or low) to write depending on pin
uint8_t TxAFR = getGPIORegister(Tx_Key).global_offset < 8 ? 0 : 1; //Use AFR[0] if pin < 8, AFR[1] if pin >= 8
uint8_t RxAFR = getGPIORegister(Rx_Key).global_offset < 8 ? 0 : 1;
uint8_t TxAFR = Tx_Pin < 8 ? 0 : 1; //Use AFR[0] if pin < 8, AFR[1] if pin >= 8
uint8_t RxAFR = Rx_Pin < 8 ? 0 : 1;
//Apply Alternate Function masks to the AFR registers for each GPIO to enable alternate functions
getGPIORegister(Tx_Key).reg->AFR[TxAFR] |= getAFMask(uart_pair.TxMask);
getGPIORegister(Rx_Key).reg->AFR[RxAFR] |= getAFMask(uart_pair.RxMask);
/*Apply Alternate Function masks to the AFR registers for each GPIO to enable alternate functions
* The AFR register for GPIO_Typedef* is actually two registers - a low reg and high reg.
* The low reg handles pins 0-7, and the high reg handles 8-15.
* Each pin gets 4 bits in the register for AFR0 - AFR7. Hence 8 * 4 = 32 bits.
* Each AFR is a different function, look at the DATASHEET (not reference manual) to find these alternate functions
*/
getGPIORegister(Tx_Key).reg->AFR[TxAFR] |= getAFMask(uart_pair.TxMask) << (4 * (Tx_Pin % 8));
getGPIORegister(Rx_Key).reg->AFR[RxAFR] |= getAFMask(uart_pair.RxMask) << (4 * (Rx_Pin % 8));
SHAL_UART_ENABLE_REG pairUARTEnable = getUARTEnableReg(pair); //Register and mask to enable the UART channel
@@ -43,7 +51,7 @@ void UART::begin(uint32_t baudRate) {
usart->CR1 = USART_CR1_TE | USART_CR1_RE; //Tx enable and Rx Enable
usart->BRR = 48000000 / baudRate; //MAKE SURE ANY FUNCTION THAT CHANGES CLOCK UPDATES THIS!
usart->BRR = 8000000 / baudRate; //MAKE SURE ANY FUNCTION THAT CHANGES CLOCK UPDATES THIS!
usart->CR1 |= USART_CR1_UE;